BELIEVE-IN SAVING ENERGY (BSE)

We Provide customers HVAC Equipment with the best selection plan, reasonable system configuration, and professional technical consulting and support. Our factory fully implementing modern management, has a professional technical development team and high-quality production, quality, environmental management team, the management team are from the world top 500 enterprises. We also have advanced production equipment and testing equipment, so we basically achieve the management standardization, modernization of production, professional of product testing and comprehensive quality and e nvironmental management system.

Wherever a large-scale refrigeration equipment is applied for, a hotel, a business center, an office building, a school, a hospital, a university or a factory, its characteristics of saving energy, safety, stability and being adaptable to the environment are always the key pointed to be measured. BSE has developed the Magnetic Levitation Central Air Conditioning Equipment family products by especially taking the factors above mentioned into consideration.

The core technology for the whole family products is the revolutionary magnetic levitation oil-free centrifugal compressor. The compressor is employed with a magnetic levitation shifting bearing that works without mechanical wear and decreases the risk of failure. The equipment is free of the lubricant, which greatly reduce the workload of its maintenance and the cost of its operation.

The integrated technology enables to lower the start-up current, and automatically adjust the quantity of refrigeration through the frequency conversion technology to adapt present requirement of refrigeration. BSE’s products have reached the highest energy efficiency, and, in particular, the partial load efficiency of the machine’s actual operating point has reached an advanced level in the whole industry.

QUESTCHILLER™ family chillers are the combinations of the most advanced technologies in the world, which allows a new height of the chiller’s efficiency. The products are the new generations of the chillers with a distinguished operational efficiency and reliability without obvious reduction in performance. That could be widely used in the newly-built and reconstructed public architectures, such as the guesthouses, the hotels, the schools, the shopping malls and the office buildings etc. or also be used in the industrial cooling and industrial environment control, such as the factory buildings and industrial laboratories.

BSE I-CHILLER™ Family Oil-Free VFD Centrifugal Modular Unit Chiller/Heat are your smart choices now and in the future. The chiller is in the design of 250kw(71RT)-4200kw(1200RT) and uniform measure of 0.89m(W)x1.2m(L)x1.8m(H).

I-CHILLER™ Modular Units is oil-free, frequency conversion centrifugal chillers/heat pumps in modular units that are applied with all digital oil-free centrifugal compressors. Combined with the high-efficient plate exchanger and the powerful PAC controller, it allows a 40% improvement of the annual operational efficiency than that of the traditional chillers. The single unit only occupies a footprint of 1㎡ with a tiny height of 1.8m and a weight of 1 ton. They are currently the chillers that are the smallest in volume, the lightest in weight, and the least needs in refrigerant charge in the world when outputting the same cold energy.

7. Free of Maintenance
   – it is oil-free, which helps to reduce the operational cost without the maintenance of the oil
8. High Energy Efficiency
   – I Chiller Modular Units is applied with oil-free variable centrifugal compressors, the energy efficiency of which reaches the national first-level and able to sustain for a long time without reduction.

9. Environment Friendly
   – I Chiller Modular Units is applied with R134a refrigerant.

10. Low Noise
    – when I Chiller Modular Units is operating, the sound volume is low to 55dB, and the audio band is rather high, which is more helpful to erase the noise.

11. Easy Installation
    – Thanks to its characteristics like a tiny volume, a small footprint, and a light weight, I-CHILLER Modular Units is able to be transported to the facilitate room by crossing a standard industrial door and an elevator easily.

BSE FIRE CHILLER™ Family is a new approach for heating source. With more attentions are paid from all sectors of community to the measures taken in energy-saving, emission-reduction and building energy conservation. The IPLV of Fire Chiller™ Series oil-free centrifugal heat pump unit is more than 9, and the power consumption is reduced by more than 35%.

The heat pump has been listed as one of the main measures for building energy conservation and the development of renewable energies, which will be greatly promoted for the heating in northern part of China. The heat pump works by power drive, which is to take heat from low-temperature heat source, then improve its temperature and then to release the heat when the temperature is high. Heat pump is able to use renewable natural low-temperature heat sources, such as the surface water, the sea water, the groundwater, the municipal waste water and also the underground soils etc., the heating energy of which is taken by the heat pump in the winter and is released back in the summer. Therefore, these sources are able to serve as the cooling sources in the summer for the air-conditioning and then to offer the heat source for the building heating in the winter. The chillers are able to work without the cooling tower system when it is refrigerating to avoid the noise pollution cause by it and the waste of the water resources; and are able to work without the boil water system when it is heating to avoid the discharge of the pollution and achieving a cleaner environment.

In order to reduce the high energy consumption BSE developed the new energy-saving Fire Chiller™ series oil-free, frequency invert centrifugal compressor, direct drive, digital magnetic levitation bearing, permanent magnet motor, etc. When the compressor speed is reduced, the power consumption is reduced significantly; the use of magnetic levitation technology has achieved oil-free operation, which help the maximum degree of reduction of the efficiency of the oil and the attenuation, so that the system is more efficient, while increasing the service life of the unit. The unit can provide high temperature chilled water in the summer, and it can realize the independent application of temperature and humidity of geothermal heat pump. In addition, the oil-free centrifugal heat pump unit with the use of renewable energy sources such as water source, geothermal source, can make the whole air conditioning system energy efficiency has been further improved, and become a model of energy conservation.

Energy Loop® Group Control System is self-developed by BSE on the base of the PAC control units with the strong processing powers. Combined with BSE’s technologies and experience accumulated for many years and targeted at the temperature, the flow and the pressure of the chillers, the cooling pumps, the condensor pumps and the cooling towers, Energy Loop® Group Control System provides the automatic control, the energy-saving strategies and the overall solutions to fulfill a flexible central group control system that could communicate with chillers. The chiller plant configured with Energy Loop® Group Control System is able to promote 80% efficiency that of the original one. This group control system is also able to offer the standard communicative accesses to support Modbus communication protocol. All Testing data are able to be transferred remotely through WIFI/3G network, and then are applied in the remote control. The users are allowed to check the instant data of the group control system on their office computers or mobile phones easily.